Next: Basic Model of One Up: Simulating the Wander Accumulation Previous: Summary

Implementing the Model

In this chapter the method of implementing the noise model will be described. As described in section 2.4, the noise model that was simulated is shown again in figure 7.1.

**Figure 7.1:** Noise Model implemented on SPW
$\begin{figure} \centerline{ \epsfig {file=eps/model3.eps, width=10cm} }\end{figure}$

Basic Model of One Clock
- Modelling Flicker Phase Filter A
- Implementing the 5Hz Noise Bandwidth
Reducing the File Size and Simulation Time
- Reducing the Simulation time for TDEV
- Reducing the Simulation time for MTIE
Extending the Model
Simulating a Maximum Reference Chain
Post Processing to Obtain TDEV and MTIE data
- Calculating TDEV
- Calculating MTIE
Summary

Mark J Ivens
11/13/1997